|warm white||daylight white||cold white||yellow||green||blue||red|
|2700 - 3500 K||4000 - 4500 K||6000 - 7500 K||510 - 530 nm||588 - 593 nm||460 - 470 nm||620 - 630 nm|
LED Strip NEONICA 5050 - 5-meter reel (300 LED SMD)
IP rating IP65 - transparent epoxy coating on top, double-sided 3M adhesive tape in the back
Made in Poland of the finest components, LED strip light is perfect for all kinds of linear illumination. Applicable for suspended ceilings, bathroom and kitchen lights, furniture, shelves and cupboards lighting. It is also widely used in advertising industry to make all kinds of light signs and channel letters.
Easy installation with 3M double-sided adhesive tape. Selected LED chips from the leading Taiwanese manufacturers provide the same colour of light through the entire length of the strip.
Quality LEDs and well matched resistors provide very long life. Light degradation by 60% after 12 years of continuous work!
- high internal protection rating IP65 - transparent epoxy coating on top
- luminous flux of a single LED - 4000-5000 mcd (about 12,5 - 15,5 lm / LED)
- Long-life (100.000)
- low power consumption of about 14W per meter
- easy installation with 3M double-sided adhesive tape
- only 2 mm thick, high flexibility
- cutting section - every 3 LEDs – 50 mm
LED type: SMD 5050
LED quantity: 300 pcs / 5 meters
Dimensions: length: 5 meters, width: 10 mm, height: 2 mm
Internal Protection Rating: IP65
Power supply: 12V DC
Maximum power consumption: 14,4 W / m
|LED Driver 18W||maximum length to connect||1,25 m|
|LED Driver 30W||maximum length to connect||2,05 m|
|LED Driver 36W||maximum length to connect||2,50 m|
|LED Driver 50W||maximum length to connect||3,45 m|
|LED Driver 60W||maximum length to connect||4,15 m|
|LED Driver 72W||maximum length to connect||5,00 m|
|LED Driver 100W||maximum length to connect||6,90 m|
|LED Driver 150W||maximum length to connect||10,40 m|
|LED Driver 200W||maximum length to connect||13,85 m|
NOTE: When connecting more than one reel each reel should be connected in parallel to the power supply. We recommend that the power strip on both sides.